Harbor Breeze HKC-103 Manual Del Usuario página 9

ASSEMBLY INSTRUCTIONS
7. If you decided to cut back the lead wire in Step 6,
strip 1/2 in. of insulation from the end of the white
wire. Twist the stripped ends of each strand of wire
within the insulation with pliers. Repeat for the black
and green wires.

Note: If you did not cut back the lead wires in step 6,
Step 7 is not necessary and you may proceed
to Step 8.
8. Install the ball end of the downrod (A) into the mounting
bracket (E) opening. Align the slot in the ball with the
tab in the mounting bracket (E). The rod should not
rotate if it is installed correctly.
DANGER: Failure to align the slot in the ball
with the tab may result in serious injury or death.
7
8
A
9
Lowes.com/harborbreeze
E