Declaration of conformity
According to the Machinery Directive 2006/42/EC, EMC Directive 2004/108/EG,
Type of equipment
Battery monitoring unit.
Brand name
MP Access BMU, MP Access BMU Basic, MP Access BLU
Manufacturer
MICROPOWER AB, Idavägen 1, S-352 46 VÄXJÖ SWEDEN,
Tel +46(0)470-727400, FAX +46(0)470-727401
The following standards and /or technical specifications have been applied:
EMC - Standard
EN 61000-6-2
EN 61000-6-3
R&TTE - Standard
ETSI EN 301489-1
ETSI EN 301489-3
ETSI EN 300440-1
ETSI EN 300440 -2
Machinery - Standard
EN 60 204-1
As manufacturer we declare under our sole responsibility that the equipment fulfils essential requirements for CE conformity
according to directive Machinery 2006/42/EC, EMC 2004/108/EG, RoHS 2011/65/EU (except the electrolyte level sensor
made from lead, that should be treated as hazardous material), CE 93/68/EEC at the date of issue of the declaration.
Date
2015-10-19
190
DECLARATION OF CONFORMITY
R&TTE Directive 1999/5/EC, RoHS Directive 2011/65/EU and
CE Marking Directive 93/68/EEC
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards -
Immunity for industrial environments.
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards -
Emission standard for residential, commercial and light-industrial environments.
Electromagnetic compatibility and Radio spectrum Matters (EMR);
ElectroMagnetic Compatibility (EMC) and standard for radio equipment and
services - Part 1: Common technical requirements.
Electromagnetic compatibility and Radio spectrum Matters (EMR);
ElectroMagnetic Compatibility (EMC) and standard for radio equipment and
services - Part 3: Specific conditions for Short-Range Devices (SRD)
operating on frequencies between 9 kHz and 40 GHz.
Electromagnetic compatibility and Radio spectrum Matters (EMR); Short
range devices; Radio equipment to be used in the 1 GHz to 40 GHz
frequency range; - Part 1: Technical characteristics and test methods.
Electromagnetic compatibility and Radio spectrum Matters (EMR); Short
range devices; Radio equipment to be used in the 1 GHz to 40 GHz
frequency range; - Part 2: Harmonized EN covering the essential
requirements of article 3.2 of the R&TTE Directive.
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
Signature
Henrik Litsin
Position
R&D manager