Safety Instructions - Husqvarna EA850 Manual De Instrucciones

E
!
WARNING!
This accessory may only be used
together with the intended clearing saw/
trimmer, see under heading "Approved
accessories" in chapter "technical data"
in the machine's Operator's Manual.
Edger
!
WARNING!
This accessory can cause serious
personal injury. Read the safety
instructions carefully. Learn how the
machine should be used.
NOTE! Read the Operator's Manual before using the
machine.
Personal protection
• Always wear boots, and the
other safety equipment
described in the section
"Personal protective
equipment".
• Always wear working
clothes and heavy-duty,
long trousers.
• Never wear loose fitting
clothes or jewellery.
• Persons with long hair
should, for personal safety,
put their hair up.
Safety instructions regarding the
surroundings
• Never allow children to use the machine.
• Ensure no one comes closer than 15 metres when working.
• Never allow anyone else to use the machine without first
ensuring that they have understood the contents of the
Operator's Manual.
42

SAFETY INSTRUCTIONS

Safety instructions before starting work
• Inspect the working area. Remove loose objects such as
stones, broken glass, nails, steel wire, string, etc. that can be
thrown or become entangled in the blade or blade guard.
• Keep unauthorised persons at a distance. Children, animals,
onlookers and helpers should be outside the safety zone of
15 meters (50 feet). Stop the machine immediately if anyone
approaches.
• Check the entire machine before starting work. Replace
damaged parts. Check for fuel leakage and that all safety
guards and covers are complete and fastened securely. Check
all nuts and bolts.
• Check the blade for
cracks or any other
damage.
• Ensure the blade guard is
mounted and not
damaged.
• Check that the blade and blade guard are correctly secured.
• When adjusting the carburettor make sure the blade is held
against the ground and that no one is in the immediate
vicinity.
• Make sure the blade does not rotate when idling.
• Make sure the handle and safety features are in order. Never
use a machine that has parts missing or has been changed in
relation to the specification.
• Ensure the edger is correctly attached to the machine.
• Only use the machine for the purpose it was intended for.