Dell LSI21320-IS Guia De Inicio Rapido página 18

Quick_Start_Guide_IS.book Page 20 Thursday, May 15, 2003 4:53 PM
20
Integrated Striping Quick Start Guide
The method for installing Windows Server 2003 software on a new system
involves using a CD.
CD Installation
Start the Windows Server 2003 installation by booting from the
1
Windows Server 2003 CD.
The system BIOS must support booting from a CD. BIOS settings
may need to be changed to allow CD booting.
Please refer to your system documentation.
Press <F6> to install the SYMMPI.SYS driver when the screen
2
displays
"Windows Server 2003 Setup".
NOTE: You must press <F6> in order for the new driver to be recognized.
Otherwise, the system does not recognize the devices controlled by the driver
during the Windows setup.
Choose S to specify an additional device when the screen displays
3
"Setup could not determine the type of one or more mass
storage devices...".
NOTE: If this screen is not displayed as the first user input, then the <F6>
key press was not seen by the setup program. Reboot the system and try again.
The system prompts for the manufacturer-supplied hardware support
disk.
Insert the LSI21320 driver diskette containing the Windows Server
4
2003 device driver required to support the LSI21320 host adapter and
press <Enter>.
Select the Windows Server 2003 driver from the menu by highlighting
5
it and press <Enter>.
Press <Enter>.
6
Return to the Windows Server 2003 Setup screen.
Press <Enter>.
7
The message about setup loading files appears.
®
Follow the Microsoft
8
this point.
Refer to your system's documentation.
Windows Server 2003 installation procedure at