Pioneer PDP-5016HD Manual De Instrucciones página 22

06 Basic Operations
1
Press the MENU button.
2
Press the c or d button to move to Screen, then press
the OK button.
3 Press the c or d button to move to PIP/TWIN, then
press the OK button.
Screen
Screen Size
PIP/TWIN
Screen Saver
4
Press the c or d button to move to PIP/TWIN Mode.
5 Press the b or a button to select the required option as
follows:
Off - PIP - TWIN1 - TWIN2
PIP/TWIN
PIP/TWIN Mode
PIP/TWIN Input
PIP Position
• If you set to Off, the following steps are not available.
6 Press the c or d button to move to PIP/TWIN Input.
7 Press the b or a button to select the required input
source as follows:
DIGITAL CH - ANALOG CH - VIDEO 1 - VIDEO 2 -
VIDEO 3 - COMPONENT 1 - COMPONENT 2 - HDMI 1 -
HDMI 2
PIP/TWIN
PIP/TWIN Mode
PIP/TWIN Input
PIP Position
• You can select the modes by simply pressing the SPLIT button
on the remote control.
• You can select sub picture sources by simply pressing the
SPLIT INPUT button on the remote control.
• You can switch the sub picture channel by pressing
SPLIT CH+/–.
• In TWIN or PIP mode, press the SWAP button to switch the
position of the 2-screen shown.
22
En
Full
PIP
DIGITAL CH
PIP
DIGITAL CH
If you select "PIP" in the step 5
You can select the position of picture in picture display.
8 Press the c or d button to move to PIP Position.
PIP/TWIN
PIP/TWIN Mode
PIP/TWIN Input DIGITAL CH
PIP Position Left-Top
(Left-Top)
(Left-Bottom)
9 Press the b or a button to select the required position
for the sub picture.
10
Press the EXIT button.
• In this mode, press P IN P SHIFT to move the position of the
small screen counter-clockwise.
• You can turn off the sub picture by simply pressing the EXIT
button on the remote control.
• Multi screen function is available with the following combina-
tions:
1) When DIGITAL CH is displayed on the main screen
ANALOG CH - VIDEO 1 - VIDEO 2 - VIDOE 3 -COMPONENT 1 -
COMPONENT 2 - HDMI 1 - HDMI 2
2) When ANALOG CH is displayed on the main screen
DIGITAL CH - VIDEO 1 - VIDEO 2 - VIDOE 3 - COMPONENT 1 -
COMPONENT 2 - HDMI 1 - HDMI 2
3) When any other input source is displayed on the main screen
ANALOG CH - DIGITAL CH
• Displaying pictures in multi-screen mode for an extended period
may cause an after-image.
PIP
(Right-Top)
(Right-Bottom)