TFA 60.2512 Instrucciones Para El Manejo página 9

TFA_No. 60.2512_Anleit_11_12
Radio controlled alarm clock with thermometer
4. For your safety
• The product is exclusively intended for the field of application
described above. The product should only be used as described
within this instruction.
• Unauthorised repairs, modifications or changes to the product
are prohibited.
• The product is not be used for medical purpose or for public
information, but is intended only for home use.
Caution!
Risk of injury!
• Keep the product and the batteries out of reach of children.
• Batteries must not be thrown into the fire, short-circuited, taken
apart or recharged. Risk of explosion!
• Batteries contain harmful acids. Low batteries should be changed
as soon as possible to prevent damage caused by a leaking bat-
tery. Never use a combination of old and new batteries together,
or batteries of different types. Wear chemical-resistant protective
gloves and glasses when handling leaked batteries.
Important information on product safety!
• Do not place the unit near extreme temperatures, vibration or
shock.
• Protect from moisture.
16
09.11.2012 9:30 Uhr Seite 9
Radio controlled alarm clock with thermometer
5. Elements
LCD
A: 12 hour or 24 hour system
B: Time with seconds or alarm time with alarm symbol
C: Time (DCF) signal- and DST symbol
D: Date with weekday
E: Indoor temperature
Buttons
F: SNOOZE/LIGHT button
G: °C/°F button
H: MODE/SET button
I: 12/24 button
J: ALARM ON/OFF switch
Housing
K: Battery compartment with RESET button
6. Getting started
• Open the battery compartment and insert the batteries 2 x 1.5 V
AA, polarity as illustrated.
• All LCD segments will light up for about a few seconds
• The clock will scan the DCF frequency signal and the DCF symbol
flashes on the LCD. When the signal is received successfully after
3-5 minutes, the radio controlled time and the DCF symbol
appears permanently.
17