Cleaning And Sanitizing - Skymsen PS-22 Manual De Instrucciones

3.4 Cleaning and sanitizing

Pull the plug out of the socket before starting the cleaning process.
The equipment must be totally clean and sanitized:
-Before being used for the first time;
-After the operation of each day;
-Whenever it is not used for a prolonged period;
-Before putting it into operation after a prolonged downtime.
Some part of the equipment can be removed for cleaning as:
-Pan, socket, and Its internal components
-Remove the socket N° 01 (fig. 01) security tray N° 04 (fig. 01), to facilitate the withdrawal
of the mouth.
-To remove the Mouth, proceed as below:
-Remove the wheel N° 03 (fig. 01) and then its internal components, in order to do so, pull
them out.
-Holding the Mouth N° 02 (fig. 01) loosen the lever located on the left side of the equipment,
moving it alternately to the sides and front.
Wash all parts with warm water and neutral SOAP.
Do not store the mouth with product in its interior, where it can freeze
10
IMPORTANT
IMPORTANT
IMPORTANT
Do not use water jet directly on the equipment