Taurus VERONA 6 Manuel De Instrucciones página 6

Ocultar thumbs Ver también para VERONA 6:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
English
Drip coffee machine
Verona 6,12
DESCRIPTION
A Filter holder
B Permanent filter
C Water tank
D Water tank lid
E Goblet
F Heating Plate
G ON/OFF indicator with pilot light
H Measuring spoon
I Supply cord
USE AND CARE
- Do not use the appliance without water.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Respect the MAX and MIN levels (Fig. 1)
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- This appliance should be stored out of reach of
children and/or the disabled.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product's packaging has
been removed.
- Before making coffee for the first time, we
recommend using the coffee maker twice with
water only, in order to clean the system.
FILLING WITH WATER:
- The deposit must be filled with water before
turning the appliance on.
- Lift the lid.
- Fill the compartment with cold water.
- Fill the tank observing the MAX and MIN levels
according to the number of cups of coffee to be
made
- Close the lid.
FILLING WITH COFFEE:
- Open the filter holder (Fig 2)
- Remove the filter holder.
- Fill the removable filter with ground coffee (6 to
7 g per cup to be prepared).
- Check that the removable filter is perfectly fitted
into the filter holder.
- Fit the filter holder in the appliance once more.
- You can use the measuring spoon to add coffee.
USE:
- Follow the procedures for "filling with water" and
"filling with coffee".
- Unroll the cable completely before plugging it in.
- Place the goblet on the heating plate.
- Connect the appliance to the mains.
- Turn the appliance on using the on/off switch.
- The pilot light comes on.
- The goblet can be removed while the coffee is
being made. The anti-drip system prevents the
coffee from spilling when the goblet is not in its
position. However, if the goblet is kept out of
its position for over 30 seconds, before all the
water has passed through the filter, the filter
may overflow.
- If you want to keep the coffee hot, place the
goblet on the heating plate without switching off
the coffee maker.
AUTO-DISCONNECTION FUNCTION
- For the purpose of saving energy, the appliance
goes to self-disconnection mode 30 minutes
after the coffee-making process has finished if
during the user has not performed any action
with it during this period.
- To return to normal operation, simply press the
ON/OFF switch.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Turn the appliance off, using the on/off switch.
- Unplug the appliance to the mains.
- Clean the appliance.
CLEANING:
- Disconnect the appliance from the mains and let
it cool before undertaking any cleaning task.
- Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO NOT
IMMERSE IN WATER OR ANY OTHER LIQUID.
- Clean the equipment using a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Verona 12

Tabla de contenido