Tascam 12 Manual Del Usuario

ENGLISH
New function in version 1.20
The following new function has been added in firmware version 1.20.
o OUTPUT DELAY function added
OUTPUT DELAY function
During live Internet streaming, when capturing audio with a different device
from the camera video, lags could occur between the streamed video and audio.
If the video is behind the audio, an offset delay can be added intentionally to
audio from the Model 12 USB output to correct the lag between the video and
audio.
1.
When the recorder is stopped, select OUTPUT DELAY on the SYSTEM
Screen, and open the OUTPUT DELAY Screen.
For setting procedures, see "Menu operation procedures" in "2 – Names and
Functions of Parts" of the Owner's Manual.
2.
Select DELAY on the OUTPUT DELAY Screen, and open the DELAY Screen.
3.
Turn the MULTI JOG dial to enable/disable the OUTPUT DELAY function that
applies delay to USB audio.
Option Meaning
DISABLE (default) Do not use the OUTPUT DELAY function
ENABLE Use the OUTPUT DELAY function
4.
Press the MULTI JOG dial to confirm the setting.
The OUTPUT DELAY Screen reopens.
Press the F1
5.
button to return to the SYSTEM Screen.
NOTE
An icon appears on the Home Screen when the OUTPUT DELAY
function is on (set to ENABLE).
042100841 1220.MA-3233A
Model 12
Using the OUTPUT DELAY function on signals output
from the MAIN OUTPUT jacks
By selecting "ON" on the MAIN OUTPUT screen, the delay can be applied not
only to the USB audio, but also to signals output from the MAIN OUTPUT
jacks. This is useful when inputting audio for live streaming into a hardware
encoder, video switcher or other external device. Furthermore, when the MAIN
OUTPUT screen setting is "ON", the delayed sound can also be monitored by
headphones. This allows the lag between the video and audio to be adjusted
while watching the video and listening in real time.
1.
When the recorder is stopped, select OUTPUT DELAY on the SYSTEM
Screen, and open the OUTPUT DELAY Screen.
2.
Select MAIN OUTPUT on the OUTPUT DELAY Screen, and open the MAIN
OUTPUT Screen.
3.
Turn the MULTI JOG dial to set whether or not delay is applied to signals
output from the MAIN OUTPUT jacks.
Option Meaning
Do not use the OUTPUT DELAY function on
OFF (default)
signals output from the MAIN OUTPUT jacks
Use the OUTPUT DELAY function on signals
ON
output from the MAIN OUTPUT jacks
ATTENTION
i Even if the MAIN OUTPUT screen setting is "ON", if the DELAY screen setting
is "DISABLE", delay will not be applied to signals output from the MAIN
OUTPUT jacks.
i Even if the DELAY screen setting is "ENABLE", when the USB audio mode
setting is "MULTI INPUT", delay will not be applied to multichannel USB
audio output (USB channels 1-10). However, delay will still be applied to
signals output from the MAIN OUTPUT jacks if the MAIN OUTPUT screen
setting is "ON".
4.
Press the MULTI JOG dial to confirm the setting.
The OUTPUT DELAY Screen will reopen.
Press the F1
5.
button to return to the SYSTEM Screen.
Setting the delay time of the OUTPUT DELAY function
1.
When the recorder is stopped, select OUTPUT DELAY on the SYSTEM
Screen, and open the OUTPUT DELAY Screen.
2.
Select DELAY TIME on the OUTPUT DELAY Screen, and open the DELAY TIME
Screen.
3.
Turn the MULTI JOG dial to set the delay time.
Setting range: 0 (default) – 2000 (in 1 ms steps)
NOTE
The F3 and F4
buttons change the delay time in 100ms
steps rather than in 1ms steps. They do not decrease/increase the delay
time −100/+100 ms.
4.
Press the MULTI JOG dial to confirm the setting.
The OUTPUT DELAY Screen will reopen.
Press the F1
5.
button to return to the SYSTEM Screen.
1
TASCAM Model 12