Kohler K-18486 Manual Del Usuario página 16

Diverter
Button
Handshower
Bracket
11. Complete the Installation - All
Ensure all connections are tight.
Remove the aerator from the spout with the key (provided).
Turn on the main water supply.
Lift and rotate the faucet handle to the full hot position. Run hot
water through the spout for about one minute to remove any
debris.
Rotate the faucet handle to the full cold position. Run cold water
through the spout for about one minute to remove any debris.
Check for leaks. Adjust as needed.
Lift the handshower out of the handshower bracket.
Push the diverter button to activate the handshower.
Check for leaks at each end of the handshower hose. Adjust as
needed.
Push the faucet handle down to turn the water off.
Place the handshower back into the handshower bracket.
Reinstall the aerator.
1054455-2-E
Faucet
Handle
Handshower
Spout
Aerator
Key
Handshower Hose
16 Kohler Co.