Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Warning: Underhood systems can be very hot! In order to avoid being burned, do not service the vehicle while it is still hot.
Service the vehicle when it is cool.
•
Remove Engine Oil Fill Cap.
•
Remove Intake Manifold Cover Retainer Screw (1) from the passenger side front of Intake Manifold Cover (2) with T30
Torx bit.
•
Remove Intake Manifold Cover.
•
Reinstall Engine Oil Fill Cap.
•
Unplug Mass Air Flow (MAF) Sensor Electrical Connector.
•
Pull MAF Sensor Wire Retainer Clip from Air Cleaner Assembly Wire Clip Mount.
Chevrolet Performance Air Induction Kit
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
Production Air Intake System Removal
REV 22FE17
DATE
26SE16
22FE17
84099784
PART NO.
REVISION
Initial Release - Benjamin Kaminsky
Revision - Benjamin Kaminsky
4
36
SHEET
OF
AUTH
2545956
2642462
Publicidad
Tabla de contenido
