6
To remove the filter cone, turn it anticlockwise in the direction
marked by the arrow and lift it out of the dust container.
7
To clean the filter cone, tap it gently against the side of a dustbin.
8
Put the filter cone back into the dust container and turn it clockwise
in the direction marked by the arrow to lock it in place ('click').
9
Close the bottom cover of the dust container and lock it by pushing
it home behind the cover latch ('click').
10
Pull the latch of the HEPA dust container filter to open it.
The spring-loaded button on the dust container pushes the filter out
,
of the hinges.
11
Rinse the pleated side of the HEPA dust container filter under a hot
slow-running tap.
English
13