RUMBLESEAT OPERATION
ADJUSTING THE HARNESS STRAP LENGTH
To Loosen Harness Strap: Pull up on ladder lock
and pull down on webbing
.
For a Tighter Fit: Pinch webbing and release from back of slip ring
9
0252_RUMBLESEAT_Instructions_V7.indd 9-10
To Tighten Harness Strap: Pull down on slip ring.
. Pull strap down until snug
.
RUMBLESEAT OPERATION
REMOVING FABRICS FROM SEAT
STEP 1: Unfasten elastic loops from lower footrest.
STEP 3: Unsnap nylon webbing from frame. Repeat
on other side.
NOTE: Reverse steps when replacing seat fabric.
STEP 2: Unzip retainer pocket located on underside
of seat.
STEP 4: Unsnap fabric from seat frame. Repeat on
other side.
STEP 5: Remove seat fabric from seat frame.
9/17/15 1:21 PM
10