Connecting Using A Cable - Sony MP-CL1A Guía De Inicio

7
Select [Close] - [ ] in the menu of the projector to exit the menu.
Hints
• While you use a Bluetooth connection, screen mirroring
connection is available via the 5 GHz wireless network only.
Depending on your country or device, the specifications of the
projector may not allow you to perform a simultaneous
connection to Bluetooth and screen mirroring function.
• When sound synchronization problems occur, use the lip-sync
function. Depending on the specifications of your speaker,
headphones, or device, a sound synchronization problem may
occur even if the lip-sync function is ON.
• Depending on the Bluetooth device, the projector may be
connected with your speakers or headphones automatically as
soon as they are paired.
• The Bluetooth connection of the projector is only available for
connecting with external Bluetooth speakers or headphones.
• If your Bluetooth device is not displayed on [Available devices],
select [Refresh] and wait until your device is displayed.
• When you connect a device other than the paired device to the
projector, select [Refresh] to update the available device list.
• You can add up to 10 devices in [Paired devices].
• Select [Forget] to delete your device from [Paired devices].

Connecting using a cable

1
Connect your speaker or headphone to the AUDIO OUT jack
using a cable.
16
EN