Connecting A Computer With A Usb Cable; For Windows - Sony VPL-SW636C Manual De Referencia

Notes
• The interactive function works by a detector in the projector, which picks up infrared rays emitted
from the tip of the Interactive Pen Device. Observe the precautions noted below.
- Avoid placing the projector where the Interactive Pen detector is directly exposed to fluorescent
light or other strong light.
- Do not cover the pen tip of the Interactive Pen Device or the Interactive Pen detector.
- Infrared data communication or noise from another device may cause improper operation.
• Observe the precautions noted below during the calibration.
- Avoid placing obstacles between the interactive detector and the screen.
- Do not move the projector and the screen.
• If Calibration Auto does not calibrate properly, try the following methods.
- Shield the screen from strong, direct outside light.
- Reduce the ambient light while Calibration Auto is performed.
- If Calibration (Auto) still does not calibrate properly after reducing the lighting as suggested
above, click Calibration (Manual(Main)) or Calibration (Manual(Sub)), then calibrate manually.
- If you use a screen which is not white, Calibration Auto may be inaccurate.
• The maximum screen size at which the Interactive function works is 100 inches.
• Images may not be projected properly depending on the operating environment or the application.
Use Input-A, Input-B, or Input-C to project the images properly.

Connecting a Computer with a USB Cable

Make sure the computer and projector are connected with an AV cable. For details on
connecting the AV cables, see "Connecting the Projector".
USB terminal
(Type A)
Computer

For Windows

Installing Interactive Presentation Utility 2
System Requirements
• CPU: Celeron 2.1GHz or faster
• Memory: 256MB or more (512MB recommend)
• Available hard drive space: 1GB or more
• OS:
Windows XP/Vista/Windows 7*
*1: 32bit edition and 64bit edition
1
Close all running applications.
2
Insert the supplied CD-ROM into the CD-ROM drive of the computer.
Open the CD-ROM and double-click "Interactive Presentation Utility 2.exe".
Using Interactive Presentation Utility 2 (VPL-SW636C/SW631C only)
USB A-B cable (not
supplied)
AV cable
1 1
/Windows 8*
23
GB