UFESA GK6700 Manual De Instrucciones página 15

Unplug the product immediately from the mains in the event of any breakdown and contact an authorised
Technical support service.
In order to prevent any risk of danger, do not open the device. Only qualified technical personnel from the
brand´s Official Technical support service may carry out repairs or procedures on the device.
Any incorrect use or improper handling of the product shall render the warranty null and void. Only an
authorised technical support service centre may carry out repairs on the product.
B&B TRENDS SL disclaims all liability for damages that may occur to people, animals or objects, for the non-
observance of these warnings.
CHARGING THE APPARATUS
Prior to using the multi-functional trimmer for the first time, charge the product for 10-12 hours, which will
only require 8 hours for a full charge thereafter. Ensure that the appliance is switched off, before plugging
in the power adaptor pin into the unit (Fig. 1) and then plug the adapter into the wall socket (100-240V~,
fig. 2).
The charging display will light up in red.
fig. 1 fig. 2
To preserve the life of the batteries, let them completely run out every six months and then charge them
for 10-12 hours.
INSTRUCTIONS FOR USE
Prior to switching on the appliance, select the desired head (C,D or E). Selecting the C head allows you
to use the guide comb. Set it into place by taking it by the side, entering it in the side of the blade and
choosing the desired measurement. Then press the on/off switch (B)
Pull upwards to remove the cutting comb.
Remove the heads by stretching outwards (Fig. 4) and set them in place by positioning it bottom-up until
you hear the clip.( Fig.5)
Simply slide the power switch (B) backwards in order to turn the product off.
15