POLTI Vaporetto Leader Manual Del Usuario página 39

ENGLISH
GENERATOR
Fig. A - Fit the pivoting wheels.
Fig. 1 - Put generator and acces-
sories switches in the "off" posi-
tion.
Remove the patented safety cap
by screwing anti-clockwise.
Fig. 2 - Place the filler funnel in
the aperture left by the tank. Do
not over-fill.
Fig. 3 - Fully screw on the paten-
ted safety cap (clockwise).
Fig. 4 - Connect the coupling on
the central connector into the plug-
in connection on the generator,
pressing lightly on the connector button, which will
click up when connected.
REFILLING
When the water has all been used the
machine will indicate (on most models)
by a buzzer or "water out" light.
A safety thermostat prevents the
empty generator from overheating.
CARE! If refilling the generator tank whilst still warm,
begin pouring slowly and in small quantities to avoid
escapes of hot steam or "spitting" from the aperture.
If you overfill or spill water around the aperture this
escapes from underneath the unit. In very hard water
areas, we recommend use of the Polti Water-filter.
ACCESSORIES
The tools are easily connected to the central connector. Put the accessories
on/off switch on the generator and the on/off switch on the steam gun to
the "off" position.
FIG. A
FIG. 2
FIG. 1
FIG. 3
FIG. 4