POLTI Vaporetto Leader Manual Del Usuario página 41

ENGLISH
Fig. 11 - Fig. 12 - The steam swit-
ch on top of the iron is your on/off
control for the steam through the
iron. When starting an ironing ses-
sion, allow the first jets of steam to
escape into an old cloth, until the
steam begins to be emitted evenly.
If you wish to dry iron, position the
regulator to indicate the required
fabric. Switch "on" the accessories
on/off switch on the generator but
switch "off" the generator on/off
switch. Wait until the control light
on top of the iron goes out, indica-
ting the iron is ready for use. Since steam is not required for dry ironing,
do not press the "steam on" switch on top of the iron.
With the Polti professional steam iron you can even iron vertical objects (eg.
curtains) while still hanging. For steaming or freshening up fabrics (curtains,
suits, shirts, etc.) you can also use the steam gun on the central connector.
IRONING
Do not leave the iron unattended whilst connected to the
mains. It is always advisable to allow the first jets of steam
to go into an old cloth, to allow remaining condensation
globules to escape. Iron only on surfaces which are not
sensitive to heat and which steam can penetrate.
ACCESSORY TOOL AND USAGE HINTS
(Standard accessory pack varies with machine)
WARNING
Before cleaning cookers, fridges lamps or other electrical appliances we
recommend you should always disconnect the appliance to be cleaned from
the mains.
STEAM GUN (ON/OFF HANDLE)
If necessary wipe the surface cleaned with a cotton cloth after cleaning with
steam gun. This helps to take up any reamining dampness, especially
after close application.
FIG. 9
FIG. 11
FIG. 10
+
–
FIG. 12