Mitsubishi Electric CITY MULTI CMB-P-V-J Manual De Instalación página 4

3
[Fig. 3.2.1]
Ⓐ
Ⓓ
Ⓑ
Ⓔ
Ⓒ
Ⓕ
Ⓐ Nut (not supplied)
Ⓑ Double nut (not supplied)
Ⓒ Hanging bolt ø10 (M10 screw) (not supplied)
Ⓓ Washer (with cushion) (supplied)
* Attach the cushion facing down.
Ⓔ Minimum 30 mm
Ⓕ Washer (without cushion) (supplied)
[Fig. 3.2.2]
Ⓐ
Ⓑ
Ⓐ
Within 1.5º
Ⓑ Drain socket
Ⓒ Viewed from the front of the control box
4
[Fig. 4.1.1]
Ⓐ
Ⓐ Ⓕ
4
CMB-P104, 106, 108V-J, CMB-P1012, 1016V-J
CMB-P104V-KB CMB-P108, 1012, 1016V-JA
CMB-P1016V-KA
14
(Top view)
<Ⓒ>
50
20
Ⓑ
Ⓒ
Ⓓ
Ⓔ
Ⓐ
Ⓕ
3.2
30
Ⓑ
Ⓑ
Ⓓ Viewed from the drain socket side
4.1
Ⓐ Indoor unit connecting port
Ⓑ Cutting point : ø9.52 (Liquid side) or ø15.88 (Gas side)
(Indoor unit model : above P50)
Ⓒ Cutting point : ø6.35 (Liquid side) or ø12.7 (Gas side)
(Indoor unit model : P50 or below)
Ⓓ Cut the piping at the cutting point
Ⓔ Have pipe expansion of indoor unit connecting port
Ⓕ Field pipe
Note:
Remove burr after cutting the piping to prevent entering the piping.
Check that there is no crack at the pipe expansion part.
Ⓐ Ⓐ
<Ⓓ>
Ⓑ