Medion LIFE E13282 Guía Rápida página 99

3.8.1. Cable and antenna
Menu option
TUNE TYPE
DIGITAL TYPE
SCAN TYPE
(only in DVB-C mode)
NETWORK ID
(only in DVB-C mode)
FREQUENCY
(only in DVB-C mode)
SYMBOL RATE
(only in DVB-C mode)
SORTING BY LCN
 After you have configured all the settings, press OK. The channel search will then
start.
14
Tuning Setup
Tune Type
Digital Type
Scan Type
Network ID
Frequency
Symbol Rate
Sorting by LCN
MENU Back
Use the direction buttons to select the reception
type:
• ATV+DTV (search for analogue and digital TV
channels)
• ATV (search for analogue TV channels)
• DTV (search for digital TV channels)
Use the direction buttons to select the connection
type (DVBT, DVBC or SATELLITE).
Set the search mode. Leave the setting on NET
WORK SCAN or FULL if you do not want to con-
figure any special settings.
Set the network ID. The default setting is AUTO.
Set the frequency. The default setting is AUTO.
Only active if the NETWORK SCAN option has
been selected in the Search mode settings.
Set the symbol rate.
Logical Channel Numbering: Select the ON setting
if you want to sort the channels based on a preset
channel list (if available from the channel supplier)
DTV
DVB-C
Network Scan
Auto
Auto
Auto
On
OK Start
Setting