Mounting; Inserting The Batteries In The Remote Control; Connecting The Antenna - Medion LIFE E13282 Guía Rápida

3.2. Mounting

Attach the stand as shown in the illustration. Carry out this step before connecting
the LCD TV.

3.3. Inserting the batteries in the remote control

 Remove the battery compartment cover on the back of the remote control.
 Insert two LR03 (AAA) 1.5 V batteries in the battery compartment of the remote
control. Check the battery polarity (see label on the bottom of the battery com-
partment).
 Close the battery compartment.
PLEASE NOTE!
Risk of damage!
The remote control can be damaged by leaking batter-
ies if not used for a long period of time!
 Remove the batteries from the remote control if the
device is not going to be used for a long period.

3.4. Connecting the antenna

Your LCD TV supports different antenna signals. You can input the following image
signals to the television through the socket labelled RF:
• Via analogue cable/an analogue house aerial
• Via a DVB-T/DVB-T2
1
• Via a DVB-C connection
 Insert the antenna cable either from the house aerial/analogue cable connec-
tion, a DVB-T antenna or the DVB-C connection in the antenna socket on the LCD
TV.
This service must be available in your region
1
antenna or
4 x ST4 x 12 (MD 31282 / MD 31283)
4 x ST4 x 16 (MD 31284 / MD 31285)
EN
11