UFESA SF1400 Manual De Instrucciones página 17

• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
• It is necessary to disconnect the appliance before assem-
bling, disassembling and cleaning.
IMPORTANT INFORMATION
This appliance is intended exclusively for domestic use for ventilation of rooms: do not use it for other
purposes. Any other usage should be considered improper and dangerous. The manufacturer shall not
be held responsible for any damage resulting from improper, incorrect and irresponsible use and/ or
for repairs made by unqualified technicians.
Do not insert fingers or any other objects through the fan's protector grille. The appliance must be kept
out of the reach of children.
Do not use the appliance if it is not working properly, or if it appears to be damaged; if in doubt, take it
to a professional, qualified technician.
Do not move the appliance while it is operating.
When the appliance is not being used, remove the plug from the mains socket. Do not touch the ap-
pliance with wet hands or feet.
Do not drag the appliance by the cable to move it.
Do not pull the cable or the appliance itself to remove the plug from the mains socket.
To clean the appliance, follow the instructions in the section of the manual dedicated to cleaning and
maintenance.
B&B TRENDS, S.L. will not be held liable for any harm or damage which may occur to people, animals
or objects as a result of failure to observe the aforementioned warnings.
INSTALLATION
• After removing the packing, check the condition of the appliance; if in doubt, do not use it and take
it to a professional, qualified technician. The packaging (plastic bags, polystyrene, fixtures, etc.) should
be kept out of the reach of children, since they are a potential source of danger, and they should be
disposed of in the appropriate specific containers for selective waste collection. Warning: any stickers
or leaflets attached to the grille must be removed before using the appliance.
• Before connecting the appliance, check that the voltage values indicated on the characteristics
plate correspond to those of the electric mains supply. In the event that the mains socket and the
appliance plug are incompatible, have the plug changed to one that is suitable by a professional,
qualified technician. They will check that the cable part of the plug is adapted to the power used by the
appliance. In general, the use of adapters or extension leads is not advisable; if this is necessary, they
must be in accordance with the safety regulations and their amperage capacity must not be less than
the maximum for the appliance.
• Before each usage, check that the appliance is in good condition and that the power cord is not
damaged: if in doubt, check with a professional, qualified technician.
17