Control Panel - UFESA SF1400 Manual De Instrucciones

Ventilador de pie
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1

CONTROL PANEL

A. Power
B. SPEED button
C. MODE button
D. TIMER button
E. SWING button
F. Swing indicator
G. Speed indicators (high-mid-low)
H. Time indicators 0.5-1-2-4 hrs
I. Sleep mode indicator
1. Switch on the appliance by pressing the ON/OFF button (A) on the control panel. The fan starts to
blow at low speed. The low speed indicator (G) lights up.
2. To change speed, press button (B) several times. Speed will change with each button stroke. The
respective indicator (G) will light up.
3. For oscillation, press the SWING button (E). The swing indicator (F) light up and the fan starts oscil-
lating. To stop oscillation, press button (E)once again.
4. Your fan has a timer function. After having switched the unit on, press the TIMER button (D) and the
fan will operate for as long as you choose: Press the timer button several times and the setting will
change with every button stroke. The respective indicator lights (H) light up. When the set time has
elapsed, the fan switches off automatically. The fan can set the timer function from 0.5-7.5 hours, as
specified by the sum of the Time Indicators that are lit.
5. The air flow can be adjusted by tilting the entire motor unit upward or downward. Loosen the neck
screw (9) and adjust themotor until you have reached the desired vertical angle. Tighten the screw
again.
6. To switch the fan off, press the ON/OFF button (A).
7. Always unplug the appliance when it is not used.
8. Ensure batteries are inserted in the correct direction. Do not mix battery types. When replacing,
ensure both batteries are change simultaneously. 2xAAA size batteries are required.
The remote control settings:
- "
" of the remote control: to turn the fan on or turn it off in standby mode
- "SPEED" of the remote control: the symbol corresponding to the selected speed
will light up: (
= mIn;
= mEd;
= max).
- Mode: the three modes are selected by pressing the "MODE": button:
1. Normal: constant ventilation
2. Silent: constant and silent ventilation (symbol)
3. Natural: intermittent ventilation (symbol " "), as shown in the diagrams shown here.
19

Publicidad

Tabla de contenido
loading

Tabla de contenido