Clean Ion Shower Mode; Child Lock; On/Off Timer - Sharp UA-KIL80E Manual De Operación

CLEAN ION SHOWER
MODE
The product releases Plasmacluster ions with
strong airflow and collects dusts while decreasing
static electricity for 10 minutes. After that, the
Sensitive dust sensor sensitivity is automatically
increased and quickly detects impurities and clean
the air powerfully for 50 minutes.
NOTE
• When the operation fi nishes after 60 minutes,
the product will return to the prior operation
mode. It is able to change the other mode
during this mode.
• The Plasmacluster ion cannot be turned
"OFF".

CHILD LOCK

The operation panel will be locked.
(with the product ON or OFF)
ON
♪
Touch for
3 sec.
♪
CANCEL
♪ ♪
Touch for
3 sec.
EN-11
SWITCH DISPLAY
♪ ♪
♪
♪
♪

ON/OFF TIMER

ON TIMER:
Select the length of time you want. The product
automatically starts once the selected time is
passed.
OFF TIMER:
Select the length of time you want. The product
automatically stops once the selected time is
reached.
(ON TIMER: with the product OFF)
(OFF TIMER: with the product ON)
Flashing
♪ ♪
NOTE
ON TIMER:
• If there is no operation in 8 seconds, the
setting will be fi nished with a beep. The ON/
OFF TIMER Lamp will be on and display the
remaining hour before the operation starts.
• You may reset the timer by touching the ON/
OFF Timer Button again.
OFF TIMER:
• If there is no operation in 8 seconds, the
setting will be fi nished with a beep. The
Display will be back to its previous status.
• After the setting is done, touch once the ON/
OFF Timer Button, the remaining hour of the
operation will show, and touch twice, you may
reset the timer.
Humidity
Temperature
PM2.5
Concentration
Wattage
♪ ♪ ♪ ♪
Cancel