Operation; Clean Air Humidify; Clean Air; Clean Ion Shower - Sharp KC-D60EU-W Manual De Funcionamiento

OPERATION

CLEAN AIR HUMIDIFY

Using to quickly clean the air, reduce odours and to humidify.
START
STOP
About Automatic Humidify Mode
The Temperature/Humidity sensors automatically detect and adjust
humidity according to changes in room temperature. Depending on
the size and humidity of the room, humidity may not reach 55~65
%. In such cases, it is recommended that CLEAN AIR HUMIDIFY/
MAX MODE be used.

CLEAN AIR

Using when additional humidity is not required.
START
STOP

CLEAN ION SHOWER

Releases high-density Plasmacluster
ions and discharges strong air flow for
60 minutes.
START
KC-D60-50-40EU_WEST.indb 9
• The louver opens and the unit starts the operation
automatically.
• Select the desired fan speed. (Ref. E-10)
• Unless the power cord has been unplugged, the operations
starts in the previous mode it was operated in.
NOTE
• Fill the Water Tank. (Ref. E-8)
• When the Water Tank is empty, the unit will operate in
"CLEAN AIR MODE" and
lights in (green) during operation of humidification.
• The louver opens and the unit starts the operation
automatically.
• Select the desired fan speed. (Ref. E-10)
• Unless the power cord has been unplugged, the operations
starts in the previous mode it was operated in.
NOTE
• The louver opens and the unit starts the operation automati-
cally.
• If the "Plasmacluster Ion
the plasmacluster ion will be not released.
• When the operation finishes, the unit will return to the prior
operation mode.
• It is possible to switch this mode to another while operating.
However, the CLEAN ION SHOWER mode will not function
after switching mode.
• The unit releases Plasmacluster ions with the maximum air
flow and collects dusts while decreasing static electricity for
10 minutes. After that, the unit operates while humidifying
with strong air flow for 50 minutes.
• The unit stops humidifying and the Humidify Light will turn
off once humidity reaches a proper level.
• When the Water Tank is empty, the Humidify Light is flash-
ing (red) and the unit will operate without humidifying.
E-9
is flashing (red).
Temperature Humidity
~18 ºC 65 %
18 ºC~24 ºC 60 %
24 ºC~ 55 %
" is OFF,
2017-02-22 15:32:55