After Use; Cleaning And Maintenance; Disposal - Beurer HS 40 Instrucciones Para El Uso

Ocultar thumbs Ver también para HS 40:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
Note
• Automatic shutoff:
For your safety, the straightener shuts off automatically after 30 minutes.

After use

> Press the on/off switch for two seconds [5]. The straightener shuts off.
> Place the straightener on a non-combustible surface.
> Remove the plug from the socket after each use.
> Let the unit cool down.
> Do not wind the mains cable around the unit!
> Store the unit in a dry place that is out of reach of children.
> The unit can be hung on a hook by the hanging eyelet [7].

8. Cleaning and maintenance

Cleaning
Warning
• Always pull the mains plug out of the socket before cleaning the device. Risk of electric shock!
• Ensure that no water gets inside the device. Risk of electric shock!
• Do not clean the device with highly flammable liquids! Risk of fire!
Note
• Your device is maintenance-free.
• Protect the device from dust, dirt and humidity.
• Do not clean the device in a dishwasher.
• Do not use any aggressive, caustic, abrasive or corrosive cleaning products or hard brushes.
• The casing of the hair straightener and the hot plates may be cleaned with a soft cloth dampened
with warm water.

9. Disposal

In the interest of protecting the environment, the unit must not be thrown out with the household
waste at the end of its service life. Dispose of the unit at a suitable local collection or recycling point.
Observe the local regulations for material disposal.
Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical
and Electronic Equipment). If you have any queries, please contact the appropriate local
authorities. You can find out about collection points for your old units e.g. from the local
municipal government, the local waste disposal company or your dealer.
17

Publicidad

Tabla de contenido
loading

Tabla de contenido