Changing Password - Roger Technology H70/200AC Instrucciones Y Advertencias Para El Instalador

Days with unit switched on.
Password
Setting a password prevents unauthorised persons from accessing the settings.
With password protection active (
Only a single password is used to control access to the gate automation system.
WARNING: Contact the Technical Support Service if you lose your password.
Password activation procedure:
• Enter the desired values for parameters
• Use the UP
• Press and hold the + and - buttons for 4 seconds.
•
• Switch the control unit off and on again. Check that password protection is activated ( =
Temporary unlock procedure:
• Enter the password.
• Check that
Password cancellation procedure:
• Enter the password (
• Save the values
• Use the UP
• Press and hold the + and - buttons for 4 seconds.
•
and
• Switch the control unit off and on again (

Changing password

Protection deactivated.
Protection activated.
72
= 123 days.
=
buttons to view the parameter
and/or DOWN
= .
= ).
, , , =
buttons to view the parameter
and/or DOWN
indicate that no password is set).
), parameters may be viewed, but the values CANNOT be modi-
, , and .
= ).
.
.
,
).
,