Descargar Imprimir esta página

Aqua Medic aquasunLED Manual Del Usuario página 12

Ocultar thumbs Ver también para aquasunLED:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
LED aquarium lighting for salt- and fresh water aquaria
Programmable light control for sunrise/fall, moonlight and cloud flying.
The aquasunLED is modularly constructed. Each LED module consists of 50 high-power LEDs 1
watt each
(15 x 1 watt blue and 35 x 1 watt 12,000 K) with a total power of app. 50 watt resp. of
high-power LEDs of 3 watt in the case of the 200 and 300 watt
programmable computer control.
cloud flying are separately controllable and make a natural lighting possible. Even a cycle for
moonlight phases is taken into account.
The housing is made of powder-coated and saltwater resistant aluminium.
1. Technical Data
Line voltage: 230 Volt/50 Hz (if not stated otherwise on the ID-label).
available in 4 versions:
aquasunLED is
-
aquasunLED 100 W, 150 W, 200 W and 300 W
-
colour temperature 14,000 K
-
safety tension 24 V with external power pack
-
computer control with USB connection for timer and dimming
Dimensions:
aquasunLED 100 W:
aquasunLED 150 W: 124.5 x 36 x 5.5 cm (l x w x h), Item-No.: 83214150, total lumen 13,740
aquasunLED 200 W:
aquasunLED 300 W: 124.5 x 36 x 5.5 cm (l x w x h), Item-No.: 83214300, total lumen 20,610
2. Unpacking
On unpacking, please check the lighting system immediately for any damages. In case of any
complaints, please contact your dealer directly.
Included in shipment:
aquasunLED
steel cable suspension aquafit II
CD incl. programmes
3. Safety advices
The lighting system cannot be used as aquarium cover. It has to be mounted only above the
aquarium. The minimum distance between lighting and aquarium must be at least 30 cm.
The housing may become hot during operation. Be cautious when touching it!
For cleaning, disconnect the lighting system from the mains and let it cool down. Afterwards,
take the lighting down.
When cleaning, take care that no humidity enters the interior of the lighting system!
Pay attention to a sufficient thermal exchange. Do not mount the system in enclosures or
behind panels. Missing aeration may result in overheating and damage the electric components.
Do not try to repair the lighting system (LEDs, electronic parts). Please send it in for checking,
preferably with a list of defects. Even broken LEDs can only be changed by the manufacturer.
When working on the light, always pull all power plugs.
12
The light channels for white LEDs, blue LEDs, moonlight and
84.5 x 36 x 5.5 cm (l x w x h), Item-No.: 83214100, total lumen 9,200
84.5 x 36 x 5.5 cm (l x w x h), Item-No.: 83214200, total lumen 13,800
version. The light is equipped with a

Publicidad

loading