Aqua Medic aquasunLED Manual Del Usuario página 15

4.2.1. Programming via the clock
Fig. 2: Clock of the aquasunLED
The clock lighting can be switched on by the light key (5). By the menu key, the individual
parameters such as time, programmes, percentage are reached that can be changed by the + and
– keys.
Nine programmes (4) are pre-adjusted that can only be changed at the computer. By the menu
key, the individual programmes are reached by pressing the + and – keys. In the same way,
time (1), density of light in per cent (3) and the respective moon phase (2) can be adjusted.
The brightness of the pre-set programme can be changed by the per cent adjustment (3). If it is
set from 100% to 50%, the density of light is halved. The percentages given in the programme are
not affected by it in detail. The entire programme is modified according to the selected proportional
indication.
Also, the data of the moon light control given in the programme cannot be changed by the clock.
However, it can be specified which moon cycle is to be present on a selected day. The moon cycle
covers 28 days for the sake of simplicity, which does not correspond precisely to the reality. If one
selects for example day 14, full moon is on the day concerned.
15