Tools and Materials
Masking
Silicone
Tape
Sealant
Center
Punch
File
Assorted
Screwdrivers
Before You Begin
CAUTION: Risk of injury or product damage. Do not attempt to cut tempered glass.
IMPORTANT! This door is designed to accommodate walls that are less than 3/8" (1 cm) out of plumb.
Verify the area the door will be attached to is within 3/8" (1 cm) or better of plumb. The door may not
function properly if the wall is more than 3/8" (1 cm) out of plumb.
Before beginning the installation, measure the dimensions of the opening and confirm the model of
door you are installing is the correct size.
The bath/shower should be installed at this time, including finished wall materials.
1035946-2-C
Tape
Measure
Drill and
5/16" bit
Miter Saw or Hack Saw with
32 Teeth Per Inch Blade
Knife
Level
Pencil or Felt
Tip Marker
Claw
Hammer
Safety Glasses
Miter Box
2
Plus:
• Drop Cloth
• Tile or Masonry Bit
(if installing onto tile walls)
Pliers
Caulk Gun
Sterling