Schlage NDEB Instrucciones De Instalación página 2

A
Install latch.
The bevel must face toward the door stop.
Actual Size
B
Install strike and door position switch (DPS).
Note: If dustbox is included, install first.
CAUTION
DPS and included strike must be installed!
DO NOT DISCARD!
DPS
ANSI Strike
Actual Size
OR
DPS
T-Strike
Actual Size
Door Thickness Adjustment
L For " thick doors, NO ADJUSTMENT IS REQUIRED.
1C\v
Continue to step 1.
For 1B\," or 2" thick doors, complete the following door
thickness adjustment steps.
A Remove chassis from outside assembly.
Pull lever post and rotate 10 degrees counter-clockwise until
adjustment plate tabs align with cutouts on assembly, then
remove chassis from escutcheon.
B Remove adjustment plate by rotating counter-clockwise.
Remove door thickness insert using pin wrench.
C Reorient and replace door thickness insert.
Door Thickness
1B\,"
2"
Chassis Side View
Door Thickness Insert
Door thickness
insert channel