Timer - Shower/Bath Fill - Kohler K-527 Guía De Propietario

Ocultar thumbs Ver también para K-527:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Timer – Shower/Bath Fill
Program 3: Enable or disable timed showering/bath fill.
When enabled, a countdown timer will begin at system start-up and
the system will automatically turn off after the set duration.
If sound is enabled, the countdown timer will chime at 2 minutes
remaining. At 1 minute remaining, the system will chime and the timer
will blink for the remaining 59 seconds.
The factory default is disabled (n).
NOTE: The shower/bath fill can be paused and resumed at any
time during the countdown.
Set the time duration within the "Prog 4" screens.
Choose "Prog 3" from the settings menu.
Use the [Up] or [Down] icon to choose "n" to disable or "y" to
enable the countdown timer. Press the [Power] icon to set.
Press the [Power] icon again to return to the settings menu.
Refer to the "Settings Menu" section to access other settings or
exit the menu.
Kohler Co.
Choose to disable (n)
or enable (y).
11
1214635-5-B

Publicidad

Tabla de contenido
loading

Tabla de contenido