Water - Set The Default Outlet (K-558) - Kohler K-527 Guía De Propietario

Choose default outlets: outlet 1 (1),
outlet 2 (2), outlet 3 (3) or any combination.
Water – Set the Default Outlet (K-558)
Program 9: Determine the default outlet(s) that will turn on at shower
start-up.
The factory default is outlet 1.
NOTE: All outlets must be enabled (Prog 8) for multiple outlet
options to appear. See the "Water – Set Active Outlets" section.
Choose "Prog 9" from the settings menu.
Use the [Up] or [Down] icon to choose the outlet(s) that will turn
on at shower start-up; "1" for outlet 1, "2" for outlet 2, "3" for
outlet 3, or any combination of multiple outlets. Press the [Power]
icon to set.
Press the [Power] icon again to return to the settings menu.
Refer to the "Settings Menu" section to access other settings or
exit the menu.
1214635-5-B 18 Kohler Co.