Water - Set The Default Outlet (K-527) - Kohler K-527 Guía De Propietario

Choose default outlets: outlet 1 (1),
outlet 2 (2), or both (b).
Water – Set the Default Outlet (K-527)
Program 9: Determine the default outlet(s) that will turn on at shower
start-up.
The factory default is outlet 1.
NOTE: Both outlets must be enabled (Prog 8) for "b" to appear as
an option. See the "Water – Set Active Outlets" section.
Choose "Prog 9" from the settings menu.
Use the [Up] or [Down] icon to choose the outlet(s) that will turn
on at shower start-up; "1" for outlet 1, "2" for outlet 2, or "b" for
both outlets (K-527 only). Press the [Power] icon to set.
Press the [Power] icon again to return to the settings menu.
Refer to the "Settings Menu" section to access other settings or
exit the menu.
Kohler Co. 17 1214635-5-B