Timer - Set The Duration - Kohler K-527 Guía De Propietario

Timer – Set the Duration
Program 4: Set the time duration for showering/bath fill.
The time duration defaults to 8 minutes. Duration can be set to
whole-minute increments between 4 and 12 minutes.
When enabled, a countdown timer will begin at system start-up and
the system will automatically turn off after the set duration. Time will
be displayed in minutes:seconds.
Timed showering/bath fill must be enabled within the "Prog 3"
screens.
IMPORTANT! Before setting duration for bath fill, time how long it
takes to fill the bath to the desired depth; take into consideration the
water that will be displaced by your body. Start timing at system
start-up then adjust the temperature as desired.
Choose "Prog 4" from the settings menu.
Use the [Up] or [Down] icon to set the time duration as desired.
Press the [Power] icon to set.
Press the [Power] icon again to return to the settings menu.
Refer to the "Settings Menu" section to access other settings or
exit the menu.
1214635-5-B
Set the minutes for
the countdown timer.
12 Kohler Co.