Dash Disassembly - Metra 99-8242G Instrucciones De Instalación

Attention! This vehicle is equipped with a
vehicle customization menu in the radio. Use
the factory radio screen to set these vehicle
settings as desired prior to radio removal
and they will stay as they were set.
1. Unclip and remove the trim panel above
the radio across the passenger side.
(Figure A)
2. Unsnap and remove the vents from
either side of the factory radio.
(Figure B)
3. Unsnap the hazard/screen assembly
above the factory radio and move aside
(not necessary to unplug). (Figure C)
4. Remove (4) 10mm bolts securing the
factory radio.
5. Remove (4) clips from factory radio trim
panel and save for kit assembly.
Continue to Kit Assembly
2

DASH DISASSEMBLY

(Figure A) (Figure B) (Figure C)
|
1.800.221.0932 MetraOnline.com