Zivan SG6 CAN Manual De Uso E Instalación página 9

Warning
This user manual must be intended as part of the product.
•
Do not make any modification to the product.
•
Do not use for any different purposes.
•
In order to guarantee the suitable protection against accidental contact to live parts, a proper connector must be installed on the output
•
Cables
An overcurrent protection device must be installed at the unit output, see electric feature section for its ratings.
•
Visualization
Digital instrument (display version)
From the starting the digital instrument will display the string of the following parameters:
BATTERY VOLTAGE (two-tone red upper led).
•
CURRENT provided by the charger (two-tone red lower led).
•
TIME in hours lacking to the end of charge (two-tone green upper led).
•
Ah supplied (two-tone green lower led).
•
By pressing the MODE button, the parameters' sequence is blocked and it will be kept the last value displayed. By pressing again on the
MODE button the sequence of parameters restarts.
BIG LED indicators (display version)
Colour
Red
Blinking red (4s ON – 1s OFF)
Red and blinking green (4s ON – 1s OFF)
Red and green alternated
Green
Blinking green (4s ON – 1s OFF)
Green and red blinking together
BI-COLOR LED indicator (version without display)
Colour
Red
Blinking red (4s ON – 1s OFF)
Orange
Blinking Orange (4s ON – 1s OFF)
Blinking Orange (1s ON – 1s OFF)
Green
Blinking green (4s ON – 1s OFF)
Green red alternated
D01596-04
SG6 CAN Bus Interface
Description
Constant or Max current phase (IUIa).
Voltage control phase (IUIa).
Overcharging phase (IUIa).
Wait phase (for equalization) (IUIa).
End charge
Equalization pulse and floating
Connection with CanConsolle or S/S HW-SW.
Description
Constant or Max current phase (IUIa).
Voltage control phase (IUIa).
Overcharging phase (IUIa).
Wait phase (for equalization) (IUIa).
Allarm.
End charge
Equalization pulse and floating
Conection with CanConsolle or S/S HW-SW.
English
9