Pulsar FORWARD F455 Manual Del Usuario página 9

Selection table for day sight insert rings
Correspondence of the inner diameter of the insert ring and the outer diameter
Cover-adapter
of the lens body of the daylight optical device (sight, telescope)
model
Insert internal diameter, mm
45.5
46
46.5
Cover adapter
47
FN 42mm
48
49
50
51.6
53.4
55
Cover adapter
56
FN 50mm
57
58
59
60
61
62
Cover adapter
FN 56mm
63
64
65
Beginning operation
SWITCHING ON AND ADJUSTING THE IMAGE
• Remove the lens cap (1) by turning it anticlockwise.
• Turn on the attachment with a short press of the ON button (9). An image will
appear on the display after a few seconds.
• Adjust the resolution of the icons on the display by rotating the dioptre
adjustment ring on your optical sight. In future, it will not be necessary to
rotate the eyepiece dioptre adjustment ring, regardless of distance and other
conditions.
• Rotate the lens focus ring (10) to focus on the object being observed.
• Basic settings (brightness and contrast adjustment) can be changed by using
the "quick" menu.
• Enter the "quick" menu with a short press of the M button (7).
• A short press of the M button (7) enables you to switch between functions, as
described below.
- Brightness
changing the display brightness value from 0 to 20.
- Contrast – by pressing the RIGHT (6) and LEFT (8) buttons
and changing the display contrast value from 0 to 20.
Turn the attachment off after use with a long press of the ON
button (9).
– by pressing the RIGHT (6) and LEFT (8) buttons and
Outer diameter of sight lens, mm
45.5
46
46.5
46.7-47.6
47.7-48.6
48.7-49.6
49.7-50.6
51.6
53.4
54.7-55.6
55.7-56.6
56.7-57.6
57.7-58.6
58.7-59.6
59.7-60.6
60.7-61.6
61.7-62.6
62.7-63.6
63.7-64.6
64.7-65.6
6
ENGLISH