Certificados Y Homologaciones; Certificado Iso 9001; Contrato De Licencia Para El Software Suministrado - Siemens SIMATIC IPC647C Guía De Primeros Pasos

Ocultar thumbs Ver también para SIMATIC IPC647C:
Tabla de contenido

Publicidad

A.2

Certificados y homologaciones

Certificado ISO 9001

El sistema de gestión de calidad de todo el proceso de producción (desarrollo, fabricación y
venta) cumple los requisitos de la norma ISO 9001:2000.
Para certificarlo, contamos con la confirmación de la DQS (Deutsche Gesellschaft zur
Zertifizierung von Qualitätsmanagementsystemen mbH, asociación alemana para la
certificación de sistemas de gestión de calidad).
Certificado Q-Net nº: DE-001108 QM

Contrato de licencia para el software suministrado

El equipo puede suministrarse con o sin software preinstalado. En el caso de equipos con
software preinstalado, tenga en cuenta los acuerdos de licencia correspondientes.
Homologaciones para EE.UU., Canadá y Australia
● Seguridad de productos
● CEM
EE.UU.
Federal Communications
Commission
Radio Frequency
Interference Statement
Shielded Cables
Modifications
Conditions of Operations
SIMATIC IPC647C
Getting Started (primeros pasos), 07/2011, A5E02669346-03
El equipo tiene la siguiente homologación:
Underwriters Laboratories (UL) según Standard UL 60950-1, Report E11 5352 y
Canadian National Standard C22.2 No. 60950-1 (I.T.E).
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Shielded cables must be used with this equipment to maintain compliance
with FCC regulations.
Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
A.2 Certificados y homologaciones
Anexo
33

Publicidad

Tabla de contenido
loading

Tabla de contenido