Datos Técnicos; Certificados Y Homologaciones; Certificado Iso 9001; Acuerdos De Licencia De Software - Siemens SIMATIC IPC547G Instrucciones De Servicio

Datos técnicos
8.1

Certificados y homologaciones

Certificado ISO 9001

El sistema de gestión de calidad de todo el proceso de producción (desarrollo, fabricación y
venta) cumple los requisitos de la norma ISO 9001.
Para certificarlo, contamos con la confirmación de la DQS (Deutsche Gesellschaft zur
Zertifizierung von Qualitätsmanagementsystemen mbH, asociación alemana para la
certificación de sistemas de gestión de calidad).

Acuerdos de licencia de software

Si el dispositivo se suministra con software instalado, deben observarse los acuerdos de
licencia correspondientes.
Homologación UL
El equipo tiene las siguientes homologaciones:
● Underwriters Laboratories (UL) conforme al estándar UL 60950-1 Second Edition,
File E115352 (I.T.E.)
● Canadian National Standard CAN/CSA-C22.2 No. 60950-1-07 Second Edition
FCC y Canadá
EE.UU.
Federal Com-
munications
Commission
Radio Fre-
quency Inter-
ference
Statement
Shielded Ca-
bles
Modifications
Conditions of
Operations
SIMATIC IPC547G
Instrucciones de servicio, 11/2016, A5E36789516-AA
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Op-
eration of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own ex-
pense.
Shielded cables must be used with this equipment to maintain compliance with
FCC regulations.
Changes or modifications not expressly approved by the manufacturer could void
the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
8
163