Emotron VSA 23 Manual Del Usuario página 43

Control signal terminals block description
1 2
TM2
Fig. 11 Signal terminal locations
Table 19
Symbol
RA
Multi-functional output terminal
Normally open contact
RB
PNP (SOURCE) input, S1 to S4 (S5/S6/S7) common terminal, (set
24V
SW1 to PNP and connect option card power.)
S1
S2
Multifunction input terminals (refer to [521] to [524] description)
S3
S4
NPN (SINK) input, S1 to S4 (S5/S6) common terminal, (set SW1 to
COM NPN, and analogue input, connect option card power, output signal
common terminal.)
10V Supply for external potentiometer for speed reference.
Analogue frequency signal input terminal or multifunction input termi-
AIN nal S7 (high level: 8V/low level: 2V), adaptable to PNP (refer to [511]
description)
Multifunction analogue output + terminal (refer to [531] description),
FM+
output signal: DC 0-10V.
42 Wiring notes
3 4 5 6 7 8 9
Description
Rated contact capacity: (250 VAC/
10 A) Contact description: (refer to
menu [551])
Emotron AB 01-3991-11r2
10 11 12