Playing Back Music Via Bluetooth; Connecting A Bluetooth Device (Pairing); Playing Back Bluetooth Device Contents - Yamaha R-N803 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

You can play back music files stored on a Bluetooth
device (such as mobile device) on the unit.
Please also refer to the owner's manual of your Bluetooth
device.
This unit
Note
• To use the Bluetooth function, set "Bluetooth" (p. 50) in the
"Setup" menu to "On" (Default).
• A Bluetooth device may not be detected by the unit or some
feature may not be compatible, depending on the model.
• You can transmit audio to Bluetooth speakers or headphones
using "MusicCast CONTROLLER" (p. 20). The audio output
can only be selected from "MusicCast CONTROLLER".
Connecting a Bluetooth device
(pairing)
When connecting a Bluetooth device to the unit for the
first time, the pairing operation is required to perform.
Pairing is an operation that registers the Bluetooth devices
with each other beforehand. Once pairing has been
completed, subsequent reconnection will be easy even
after the Bluetooth connection is disconnected.
SPEAKERS
A
PHONO
COAX 1 COAX 2
OPT 1
1
Press BLUETOOTH to select "Bluetooth" as
the input source.
If another Bluetooth device is already connected,
disconnect the Bluetooth connection before you
perform a pairing operation.
2
Turn on the Bluetooth function of the
Bluetooth device.
32
En

Playing back music via Bluetooth

Bluetooth device
(such as mobile device)
B
SLEEP
BLUETOOTH
BLUETOOTH
OPT 2
CD
3
On the Bluetooth device, select the unit
(network name) from the available device list.
After pairing has been completed and the unit is
connected to the Bluetooth device, "Connected"
appears on the front display, and Bluetooth indicator
will be light up.
BLUETOOTH
Connected
Note
• If the pass key is required, enter the number "0000".
• You can change the network name of this unit in "Network
Name" (p.49) in the "Setup" menu.
Playing back Bluetooth device
contents
Connect a paired Bluetooth device and start playback.
Check the following beforehand:
• Pairing has been completed.
• Bluetooth function on the Bluetooth device is turned on.
SPEAKERS
A
PHONO
COAX 1 COAX 2
OPT 1
REPEAT
1
Press BLUETOOTH to select "Bluetooth" as
the input source.
Note
If the unit detects the Bluetooth device previously connected, the
unit automatically connects to the Bluetooth device after Step 1.
To establish another Bluetooth connection, first disconnect the
current Bluetooth connection.
A
VOL.
B
SLEEP
BLUETOOTH
BLUETOOTH
OPT 2
CD
SHUFFLE
Playback keys

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

R-n803d

Tabla de contenido