Advanced Operation; Optimizing The Speaker Settings Automatically (Ypao) - Yamaha R-N803 Manual De Instrucciones

ADVANCED OPERATION

Optimizing the speaker settings automatically (YPAO)

The Yamaha Parametric room Acoustic Optimizer
(YPAO) function detects speaker connections, measures
the distances from them to your listening position, and
then automatically optimizes the speaker settings, such as
volume balance and acoustic parameters, to suit your
room.
Note
• The YPAO function of this unit adopts the YPAO-R.S.C.
(Reflected Sound Control) technology that enables to create
natural sound fields like a room specifically designed for
acoustic perfection.
• Note the following regarding YPAO measurement.
– Test tones are output at high volume and may surprise or
frighten small children.
– Test tone volume cannot be adjusted.
– Keep the room as quiet as possible.
– Stay in a corner of the room behind the listening position so
that you do not become an obstacle between speakers and the
YPAO microphone.
– Do not connect headphones.
SPEAKERS A/B
A
PHONO
COAX 1 COAX 2
OPT 1
LINE 1
TUNER
BAND
MEMORY
Cursor keys
B / C / D / E
ENTER
HOME
SETUP
NOW PLAYING
42
En
SPEAKERS
B
SLEEP
BLUETOOTH
OPT 2 CD
LINE 2 LINE 3
NET USB
TUNING
PRESET
ENTER
RETURN
RETURN
OPTION
VOLUME
MUTE
1
Press A (power) on the front panel to turn on
this unit.
2
Turn on the subwoofer and set the volume to
half.
If the crossover frequency is adjustable, set it to
maximum.
CROSSOVER/
VOLUME HIGH CUT
MIN MAX MIN
3
Configure the following settings.
• Press SPEAKERS A/B on the front panel or
remote control to select the speakers to be used.
• Set the BASS control and TREBLE control on the
front panel to 0 (center position).
• Set the BALANCE control on the front panel to the
center position.
• Set the LOUDNESS control on the front panel to
FLAT (center position).
• If Pure Direct is turned on, press PURE DIRECT
on the front panel to turn it off.
•
SPEAKERS A/B
BASS TREBLE
Note
• The speaker settings are individually saved depending on the
speaker system (A, B, A+B).
• When using YPAO, select the speaker system (A+B) only for
the bi-wire connection. If you select the speaker system (A+B)
when connecting other speakers to the SPEAKERS A/B
terminals, the measurement will not be performed properly.
SW
MAX
PURE DIRECT
BALANCE LOUDNESS