Arai Helmet Classic-V Instrucciones De Operación página 8

Tabla de contenido

Publicidad

English
by the lining. If the lining slips easily over the skin the
helmet is too large.
In the event of an accident, you will be subjected to
impacts that can come from any direction. Some may
tend to lift the helmet from your head. Therefore, it is
imperative that your chinstrap is securely fastened,
keeping your helmet firmly in place whenever you ride/
drive. Make sure that the chinstrap is tightly fastened
with its D-Rings before starting off.
NOTES ON MAINTENANCE
Although your helmet is solidly built, like any fine piece
of equipment, it should be handled with care. Dropping
onto solid surfaces and other rough handling may
damage the painted surface and/or decrease its ability
to protect.
Use a solution of mild soap or detergent and lukewarm
water to clean both the inside and outside of your
helmet and shield. Rinse well with clean water, and
wipe off with a soft cloth. Never use petrol, thinner,
8

Publicidad

Tabla de contenido
loading

Tabla de contenido