PRODUCT GUARANTEE / INSTALLATION NORMS
10 - CLEANING AND MAINTENANCE
Teka´s shower trays can be cleaned with any product apt for household use if they are
rinsed enough later except those not advised for marble derivative. Read instructions for
each product.
It is advisable to clean with soapy water with a cloth or a smooth sponge.
★ Do not use abrasive scouring pads or cutting objects.
To disinfect, bleach or ammonia diluted can be used rinsing immediately later
with abundant water.
Against stains of cement, hydrochloric acid may be used very carefully. Its gases
attack chrome surfaces. It is advisable to use it before installing shower enclosure
and taps.
★ Never mix with bleach because it generates a very toxic gas.
Products against lime can be used if they do so for a short period of time and are
rinsed immediately after with abundant water.
★ Do not use rubbing alcohol (cleaning alcohol) for in some cases van damage
the tray.
TEKA will not be liable for the problems or damages caused on the
shower trays for not meeting the before mentioned indications.
10