Predator PUR80WIFI Manual De Uso página 32

Put the pre-fi lter back into the appliance. Attach all hooks properly to the
appliance.
Note: Make sure that the side with the two projections is pointing towards you.
To reattach the front panel, insert the bottom hooks into the bottom of the
appliance fi rst (1). Then push the pannel against the body of the appliance
(2).
Air quality sensor
Clean the air quality sensor every 2 months for optimal functioning of the
appliance. Clean it more frequently if you use the appliance in a dusty en-
vironment.
Note: When the humidity level in the room is very high, it is possible that the air
quality sensor has some condensation. As a result the AIR QUALITY light on the con-
trol panel and the air quality light ring may indicate that the air quality is bad even
thought the air quaity is good. In this case you have to clean the air quality senor or
use one of the manual speed settings.
Clean the air quality sensor intake and the air quality sensor exit with a soft
brush.
Remove the air quality sensor cover.
www.glaziar.com / info@glaziar.com
32