Filter Replacement - Predator PUR80WIFI Manual De Uso

Clean the air quality sensor, the dust intake and the dust exit with a lightly
moistened cotton swab.
Dry them with a dry cotton swab.
Reattach the air quality sensor cover.

FILTER REPLACEMENT

Filter maintenance
This appliance is equipped with the Healthy air protect lock to ensure that the
fi lters are in optimal condition when the appliance is operating.
When one of the fi lters is almost full and has to be cleaned or replaced, the
appropriate fi lter replacement light starts to fl ash. When you do not replace
the indicated fi lter, the appliance stops operating and the appliance is locked.
When the appliance is locked, the fi lter replacement light of that particular
fi lter will stay on constantly.
Note:Only replace a fi lter when the fi lter replacement light fl ashes. if you replace the
fi lter before the fi lter replacement light starts fl ashing, the lifetime counter will not be
reset and it will continue counting the lifetime of the previous fi lter. As a result, the
fi lter replacement light will start fl ashing sooner than it should.
Filter replacement lights
The fi lter replacement lights indicates which fi lter has to be cleaned or repla-
ced.
-Filter replacement light. 1 fl ashes: Then fi lter 3 (the pre-fi lter) has to be clea-
ned. See chapter "Cleaning" for further instructions.
-Filter replacement light 2 fl ashes and also Replace fi lter indicator light: Filter 2
(Activated Carbon fi lter) and Filter. (HEPA fi lter) have to be replaced.
www.glaziar.com / info@glaziar.com
33