Install the Sink (cont.)
NOTE: Apply additional sealant if using shims.
Carefully re-position the sink in the countertop opening.
Tile and grout to allow an acceptable space between the tile and
sink.
To absorb the vibration from a garbage disposal, apply sealant
between the sink and tile directly adjacent to the sink rim. This
will prevent the grout from cracking around the sink.
Allow the sealant to cure for at least 30 minutes before
proceeding.
Install the garbage disposal, if desired. Follow the manufacturer's
instructions.
Connect and tighten the trap to the drain, and complete the water
supply connections to the faucet according to the instructions
packed with the faucet.
Run water into the sink and check for leaks.
Clean up with a non-abrasive cleaner.
1019943-2-A
8
Kohler Co.