Fanimation OBVI FP3050 Serie Manual De Instrucciones página 11

How to Wire Your Ceiling Fan (Continued)
BLACK
L
AC
POWER
WHITE
N
RED
L1
3. Connect wires using connectors as shown in
Figure 4.
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors. Do not operate fan until the blades are in
place. Noise and motor damage could result.
4. After connections have been made, put the white
and green leads to one side and the black leads
towards the other side, the connection should be
turned upward and carefully push leads into the outlet
box. The wires should be spread apart with the
grounded conductor and the equipment-grounding
conductor on one side of the outlet box and the
ungrounded conductor on the other side. (Figure 5)
GROUND
HANGER
BRACKET
HANGER
BALL
RECEIVER
BLACK
ANTENNA
Figure 4
11
BLUE
BROWN
CAUTION: INCORRECT WIRE CONNECTION
COULD DAMAGE THIS RECEIVER.
RECEIVER HARDWARE USED:
Wire Connectors
Green Wire
from Supply
(Ground)
Green Wire
from Hanger
Bracket (Ground)
Green Wire
from Receiver (2)
(Ground)
Green Wire
from Hanger
Ball (Ground)
RED
GRAY
YELLOW
DC MOTOR
LIGHT KIT
X 9
White Wire Listed
from Supply
Outlet Box
Black Wire
from Supply
White Wire
from Receiver
Red Wire
from Supply
Receiver
Black Wire
from Receiver
Figure 5
Household
Supply