Electrical Connections - Beko HCA 62420 B Manual Del Usuario

5 Setting Up the Device
Place the chimney body on the hood body. Then,
draw delicately the hood part signed with B
upwards, until it becomes possible to screw it
to the fastening element previously attached to
the wall (Fig. 15).
Be especialy attentive while sliding the
chimney body
Fig.15 Chimney body assembly
This assembly operation
C
shall be performed very ca-
refully, in order to avoid the
scratching of chimney body
and hood itself.

5.3 Electrical connections

The network voltage shall correspond to the
voltage indicated at the plate placed inside the
hood. If the hood is equipped with a plug, insert
it into the socket complying with the applicable
requirements, and located in the easily accessible
place. If the hood is not equipped with a plug,
the hood installations shall be performed by a
person having the required authorizations (such
as electrician).
14 / EN
2 x O3,9x9,5
B
A
A
B
Cooker Hood / Instructions Booklet